ZHG Heavy duty frame chain desagger

Short Description:

This machine is a continuous working slag conveying equipment, composed of transmission device, driven device, slag trough, chain and roller. The transmission device is composed of motor, reducer, active chain and frame. The power is transferred to the reducer by the motor through the triangle belt, and through the coupling, so that the active sprocket turns the drive chain. The chain is made of chain joints connected with column pins. The chain joints are made of three different materials, namely cast iron, ductile iron and cast steel. The chain slides in the slag conveying trough covered with cast stone slabs to take away the slag. So it has the characteristics of clean slag removal, wear resistance and long service time. Because the coupling is equipped with a pin by the safety slot, so that the slag removal machine overload and abnormal is not easy to damage the important parts and burn the motor.
This equipment can be used to remove the slag of coal-fired steam and hot water boilers used in power generation production and domestic heating. It can be matched with 100,000 KW units and horizontal boilers below 300 tons/hour. It can remove the slag of single or multiple boilers to make the boiler run normally and improve the working conditions of the boiler room. Keep the boiler clean, make the boiler normal operation, ensure production, life needs. This machine belongs to open water closed slag removal machine, the form of cement machine groove and iron machine groove two. In addition, it can also be used for the conveying of particles and powdery industrial materials with a diameter of 80mm or less, which is widely used.

Product Detail

Product Tags

ZHG Structure diagram of heavy frame chain desagger


ZHG heavy frame chain desagging machine technical parameters

The name of the ZHG-500 ZHG-600 ZHG-700 ZHG-800 ZHG-1000 ZHG-1200 ZHG-1400 ZHG-1600
Slag amount t/h 2.2 4 7 10 15 20 25 30
Chain speed m/min 2-3.5 2-3.5 2-3.5 2-3.5 2.5-3.5 2.5-3.5 2.5-3.5 2.5-3.5
The chain specification 300x210x80 400x210x80 500x210x80 600x210x80 800x210x80 1000x210x80 1200x210x80 1200x210x80
Tilt Angle 0-25° 0-25° 0-25° 0-25° 0-25° 0-25° 0-25° 0-25°
Maximum transmission length m 40 50 60 70 80 80 80 80
Power range Kw 2.2-7.5 4-7.5 4-11 4-15 7.5-15 7.5-22 7.5-22 7.5-22

  • Previous:
  • Next:

  • Write your message here and send it to us